Transport
Start, stop, cue, audition, and unload a deck, with the vinyl brake.
The transport starts, stops, and cues the loaded track. Its keys sit under the performance panel: Play reads Pause while a track plays, and Cue sets or auditions the cue point. The click that unloads the deck sits on the track cover instead, and Unload the deck covers it.
| Key | Label |
|---|---|
| Play / pause | Play while stopped, Pause while playing |
| Cue | Cue |
Both keys use the same deck-wide enable rule. They are dead (and drawn at half opacity) in three cases: the engine is not running, a track is loading, or the deck holds no track.
Play and pause
- Load a track onto the deck, by dragging a library row onto it or by clicking the cover (Decks overview). The drag needs a running engine; the cover opens the library either way.
- Press Play. Playback starts from the playhead and the key becomes Pause.
- Press Pause to stop where the playhead is.
Nothing is re-cued when you pause and play again.
Set a cue point
- Park the playhead where the cue belongs, by clicking the overview strip or scrubbing the waveform (Jog and waveform).
- Tap: release Cue under 180 ms. The cue point is set at the playhead.
With Q on, the point snaps to the beat grid. The key lights up while you press it.
Audition from the cue point
- Hold: keep Cue down past 180 ms. The deck plays forwards from the cue point.
- Release. The deck returns to where it was before the hold, in the state it was in.
Playing stays playing, and paused stays paused. The key stays lit through an audition. A deck with no cue point yet auditions from its current position on the first hold.
Turn on the vinyl brake
The brake is off by default.
- Open Settings → Deck → Vinyl brake pause.
- Turn on Brake on pause. Its description reads “Pause spins the deck down like a turntable instead of cutting instantly.”
- Set Stop time if the default is not right.
| Setting | Range | Default |
|---|---|---|
| Stop time | 0.05–3.0 s, 0.05 s steps | 0.50 s |
The hint under it: “How long the platter takes to stop after pause.”
With the brake on, pausing ramps the platter to a stop instead of muting. Pausing while your finger is on the jog cuts instantly, because the brake belongs to the pause itself: lifting your finger off the platter never starts one. Pressing play or loading a track cancels a brake in progress, so the ramp never rides into new audio.
Unload the deck
Loading and unloading live on the track cover, next to the title, rather than in the header. The state of the deck decides which action the cover offers:
- Empty deck: click the cover to open the library and pick the track there.
- Loaded deck: hover or focus the cover and click the eject chip once it fills the cover. The deck clears.
- Playing deck: the same click asks Unload Deck A?. Cancel keeps the track playing, and Unload clears it.
The library entry, cues, loops and beat grid stay; you are unloading the player, not the track. The eject chip dims while the engine is stopped and while a load is in flight, so it cannot race the deck. Decks overview has the full set of cover states.
Time readouts
The track info shows remaining time as -m:ss.t and the total duration as m:ss.t. Both read — before anything is loaded.
Loops and hot cues move the playhead without touching the transport. See Loops and Hot Cues.