Skip to content

Mixer and deck

Volume normalizer, sampler routing, realtime stems, and the jog, brake, tempo, key lock, and sampler defaults for new decks.

Everything in the Deck section seeds new decks. A track already loaded keeps what it was loaded with until you change it on the deck itself. Save writes these preferences and restarts the audio engine when it is running.

The deck count and the on-screen panels live under Layout, because they shape the whole page rather than a deck’s defaults.

Mixer → Crossfader

Card subtitle: “The curve the crossfader follows, plus the two performance flags.”

Control Type Values Default Effect
Default curve radio + preview Constant power / Linear / Fast cut, plus any imported custom group or curve set Constant power Gain law both sides follow as the fader moves. Each choice shows its A/B shape. Constant power keeps the sum of both channels even through the middle; linear is the plain 1 - x / x crossfade; fast cut stays at full gain near the ends and swaps over quickly.
Invert (swap A and B) checkbox on / off off Swaps the A and B gains without mirroring the fader position.
Disable the crossfader checkbox on / off off Bypasses the curve and leaves both sides at full gain; deck THRU assignments still bypass the fader.

Changing any of these restarts the audio engine, because they seed the mixer it builds. A controller can change the active curve live without a restart (see crossfader curves).

Custom curves

The full custom curve editor is not exposed in the app yet. VirtualDJ curve import and export live under Settings → Integrations; an imported curve becomes a native A/B group and is listed under Default curve so it can be selected immediately. The point/segment editor and curve-set editor remain in the codebase for the dedicated editor issue.

Mixer → Volume normalizer

Card subtitle: “Match analyzed tracks to a target loudness.”

Control Type Values Default Effect
Volume normalizer header switch on / off on Enables the loudness match for analyzed tracks. With it off, Target LUFS is hidden.
Target LUFS stepper −24.0 to −9.0 in 0.5 steps −18.0 Perceived loudness the normalizer aims at.

The gain it applies shows in the deck’s Gain popover as Auto gain. Tracks without a loudness measurement are left alone, so analyze a track before you rely on it. See Analysis.

Mixer → Sampler routing

Card subtitle: “Where sampler hits enter the signal path, relative to the channel strip.”

Control Type Values Default Effect
Sampler strip route select Before channel strip / After channel strip Before channel strip Whether the channel strip processes sampler hits.

Before channel strip mixes sampler hits into the deck’s dry signal before EQ, filter and fader, so those act on the hits too. After channel strip sums them past that processing, so the channel’s EQ, filter and fader leave them alone. The crossfader and master still apply.

Mixer → Realtime Stems

Card description: “Separates tracks without cached stems while they play. Tracks with offline stems always take priority.” Under it the card adds Not recommended. and “Quality is lower and it uses a CPU core.”

Control Type Values Default Effect
Realtime Stems header switch on / off off Separates tracks that have no stem cache while they play.

Offline stems always win, so turning this on never changes a track that already has a stem cache. What separation costs and where the files go: Generate stems.

Deck → Jog wheel

Card subtitle: “Defaults for top (touch) and outer (freewheel) platter policy.”

Control Type Values Default Effect
Top jog mode select Vinyl (scratch) / Pitch bend / Ignore Vinyl (scratch) Behaviour of the platter’s top surface. Ignore makes that surface inert.
Outer jog mode select Vinyl (scratch) / Pitch bend / Ignore Pitch bend Behaviour of the outer ring. An outer jog set to Pitch bend scratches while the deck is paused.

Deck → Vinyl brake pause

Card subtitle: “Pause spins the deck down like a turntable instead of cutting instantly.”

Control Type Values Default Effect
Brake on pause header switch on / off off Off means pause cuts.
Stop time stepper 0.05–3.0 s in 0.05 steps 0.50 s Hidden while the brake is off. Hint: “How long the platter takes to stop after pause.”

Deck → Tempo and Key

Card subtitle: “Default pitch-fader range and key lock for new decks.”

Control Type Values Default Effect
Default tempo range select ±6%, ±10%, ±16%, ±25% ±6% Pitch-fader range a freshly loaded deck starts with.
Default key lock checkbox (Key lock) on / off off Key lock state a freshly loaded deck starts with.

The key lock hint is “Tempo-only pitch when on (time-stretch). Off = vinyl tempo.” Both values are the ones a freshly loaded deck starts with. The tempo range key on the deck still cycles through the ladder.

Deck → Sampler

Card subtitle: “Default play mode for inherit banks and default bank per deck.”

Control Type Values Default Effect
Sampler play mode select Oneshot / Hold / Loop Oneshot Play mode for hits in inherit banks.
Deck A default sampler bank select a bank, or None None Bank deck A’s pads start on.
Deck B default sampler bank select a bank, or None None Bank deck B’s pads start on.
Deck C default sampler bank select a bank, or None None Bank deck C’s pads start on. Shown in a four-deck layout.
Deck D default sampler bank select a bank, or None None Bank deck D’s pads start on. Shown in a four-deck layout.

The app shows one default-bank select per deck that currently exists, so a four-deck layout shows four. Options are your banks plus None.

Sampler hits are routed by Sampler strip route in the Mixer section above. The pads themselves are covered in Sampler. Jog, tempo and brake behaviour on the deck is covered in Jog and waveform and Transport.