Loop Roll
Hold a pad to loop the deck in place, release to drop straight back into the track.
Select the Roll tab and each pad is a temporary loop of a fixed length, starting from wherever the playhead is when you press it.
Before you start
- A track is loaded on the deck. With no track the pads are disabled: Overview.
- The track needs an analysed BPM, because loop lengths are measured in beats.
- With Quantize enabled the loop starts on the beat rather than mid-beat.
Loop lengths
| Pad | Length |
|---|---|
| 1 | 1/32 beat |
| 2 | 1/16 beat |
| 3 | 1/8 beat |
| 4 | 1/4 beat |
| 5 | 1/2 beat |
| 6 | 1 beat |
| 7 | 2 beats |
| 8 | 4 beats |
Roll
- Select the Roll tab.
- Hold the pad to start the loop at that pad’s length.
- Release the pad to end the loop.
Each pad is labelled with its loop length.
Holding several pads at once re-triggers the loop from the current position, at the length of the most recently pressed pad.
What happens when you release
The loop ends and playback continues from the position the track would have reached if the loop had never started. If you had a loop set up before pressing the pad, that loop is restored.
If the loop does not behave as expected
- Still looping: release the pad; nothing latches.
- New loop length ignored: press the pad you want last, since the most recent press sets the length.
- Loop starts off the beat: check that Quantize is on, then check the track’s BPM in Beat grid.