Skip to content

Export to a CDJ USB drive

Write playlists and folder collections to a USB drive that Pioneer CDJ/XDJ players read natively, without rekordbox.

Mixar can write your playlists and folder collections to a USB drive in the layout Pioneer players expect. Plug the drive into a CDJ/XDJ to browse your own sets, with no rekordbox installation involved.

The drive keeps working with rekordbox too. What Mixar writes is the same arrangement rekordbox exports: a device database plus per-track analysis files next to the audio.

What you need

  • A USB drive (or any folder, for a dry run) with room for the tracks you select.
  • For playback on hardware, the drive must be formatted FAT32 or exFAT: that is the players’ requirement, not Mixar’s.
  • Your music and playlists in the library.

Exporting

  1. Plug in the drive (or pick any folder, for a dry run).
  2. Open the collection you want on the drive and use the ⋮ menu at the top right of its track list → Export to CDJ USB…. The collection you have open is the one that gets written, so repeat this for every playlist or folder collection you want on the drive.
  3. In the dialog, set Destination to the drive’s mount point. Type the path, or press Browse… to pick it in your system’s own folder chooser. The dialog names the collection it is about to write.
  4. Leave Override files already on the drive unchecked unless you want a full rewrite. With it off, a file already on the drive with the same name and size is reused as is.
  5. Press Export. While it runs the dialog shows Exporting….
  6. Read the toast. It summarises the result, for example Exported 42 tracks, 3 reused, 1 playlist, 1.2 GB copied. If anything was skipped or dropped, that toast becomes a warning (with the count and the first few details) or an error toast instead.

A big export takes a while. Every track in the collection is copied, and its analysis is computed while the export runs. You can keep browsing the library meanwhile. The export holds the library only for short moments, not for the whole run.

What lands on the drive

<drive>/
  Contents/<Artist>/<Album>/<file>     audio files
  PIONEER/Artwork/<id>/a1.jpg          cover thumbnails
  PIONEER/rekordbox/export.pdb         tracks + playlists
  PIONEER/rekordbox/mixar-export.json  what Mixar has already put on the drive
  PIONEER/USBANLZ/<hash>/ANLZ0000.DAT  beat grid, waveforms, cues
  PIONEER/USBANLZ/<hash>/ANLZ0000.EXT
Part What it gives the player
Contents/… The audio. Tracks are named after artist and album (sanitized for FAT32).
Artwork/… The cover each track shows in the browse list. Covers come from the artwork embedded in your files, scaled down; an album’s cover is stored once however many of its tracks you export.
export.pdb The track list, its metadata (including rating, year, comment, track/disc number and colour label), and every playlist you exported.
mixar-export.json Mixar’s own note of what it has written, so later exports add to the drive instead of replacing it. Players ignore the file.
USBANLZ/… Beat grids, the rolling waveform, hot cues, memory cues and saved loops.
  • A folder collection is reproduced as a real directory tree under Contents/<folder name>/…, so the files stay organised the way they are on your disk. It also becomes a playlist of the same name, so you can reach it from the player’s playlist browser rather than by walking the file tree.
  • Every playlist you export becomes a playlist on the player, in its stored order.
  • Tracks that share an artist/album keep sharing one directory; a name that would collide gets a (2) suffix, so no track is ever overwritten by another.

Re-exporting

Exports add to the drive. Each run rewrites the player’s database from everything Mixar put there before plus the collection you just selected. Exporting playlist by playlist therefore builds one library on the drive instead of each run replacing the last.

  • Nothing is deleted: audio, covers and analysis files from earlier exports (or from rekordbox) stay on the drive. A collection you stop exporting also stays in the player’s database. It is no longer written, but nothing removes it. Format the drive, or delete PIONEER/rekordbox/export.pdb and PIONEER/rekordbox/mixar-export.json together, for a clean start.
  • With Override files already on the drive unchecked, a track whose on-drive name and size already match is left alone. Its analysis files are reused when they already exist. Tick it to write everything again.
  • If something other than Mixar rewrites the database on the drive (rekordbox, or another tool), Mixar notices on the next export and says so in a warning. It then rebuilds the database from the collection you selected. The tracks and files already on the drive are kept. The same happens to a drive rekordbox built. Its database is replaced (with a warning) by the one for what you export, while the audio already on the drive is left alone.

What is not exported

These have no destination in the device format, so exports leave them behind:

  • A colour label outside the eight the players know: Mixar’s editor only offers those eight (pink, red, orange, yellow, green, aqua, blue, purple), so an arbitrary colour has no device row to point at.
  • Play history, My Tags, stems, and sampler banks.
  • The newer OneLibrary format and .2EX 3-band waveforms. Newer players (CDJ-3000X, XDJ-AZ, OPUS-QUAD) read the format Mixar writes; they just draw lower-resolution waveforms from it.
  • Covers only travel if the file carries one: a track whose audio has no embedded artwork shows no cover on the player.

If something looks wrong

Symptom Likely cause
The player says no database / shows nothing The drive is not FAT32 or exFAT, or PIONEER/rekordbox/export.pdb is missing; re-export to the drive root.
A track plays but shows no waveform It had no analysis data when it was exported. The player analyzes it on first load; re-export after analyzing it in Mixar to get the waveform immediately.
The export toast counts fewer tracks than the collection holds Some tracks could not be written: the toast’s error list names them (usually a file that moved or was deleted since it was imported).
A stale track or playlist is still on the player Nothing is deleted on re-export; remove it in Mixar and format the drive for a clean start.

Internals: the layout rules, the database and analysis writers, and how the drive is verified: CDJ USB export (developers).