Overview
How the mixer screen is wired: channel strips and their processing order, the crossfader, the master output, the headphone cue bus, and Beat FX.
The mixer screen is where you play: a waveform pane on top, the decks around the central channel strips, the library underneath, and a thin Beat FX strip pinned to the bottom. Every deck feeds one channel strip, and the strips are what reach the master output and the headphones.
Signal flow
A channel crosses its strip in a fixed order: gain trim → EQ → filter → FX → meter and cue tap → fader. After the fader the crossfader scales the channel, and the scaled channels reach the master output.
That order decides what the controls do to what you hear:
- The meter and the headphones already include the effect, because the tap sits after FX.
- The channel fader still controls how loud the whole channel is, because it comes after the tap.
- The crossfader scales the effect exactly like the dry signal, because it is applied after the channel faders.
- Cueing a deck does not add it to the master, because the tap feeds a separate bus. See Cueing.
- The FX stage is shared: a deck runs through it only while its header FX key is on. See Beat FX.
The screen
Choose a two- or four-deck layout under Settings → Layout → Deck layout. Changing the layout restarts the audio engine and reloads tracks on decks that remain active.
Four-deck mode gives the decks more vertical room and splits each stacked pair of decks with a hairline. On short windows, use the main scrollbar or mouse wheel to reach the docked library below the decks.
Deck cards
Deck identity colors stay consistent across headers, waveforms, tempo controls, mixer channels, and library load actions: A blue, B rose, C amber, and D violet.
Each deck card holds the track info, the performance pads, the tempo column, the transport (Cue / Play), and a row of header buttons:
- Gain: opens the deck’s pre-fader trim.
- Master: makes this deck the tempo master (the crown).
- Q: quantize. Snaps cue, loop, hot-cue, roll and beat-jump actions to the beat grid.
- S: slip. Keeps a shadow playhead moving under loops and scratch, then catches up on exit.
- FX: routes this deck through the shared Beat FX unit; see Beat FX.
Loading and ejecting sit on the deck’s track cover, not in this row; see Cover actions.
In compact layouts, scroll the deck header to reach its remaining buttons. Use the mouse wheel or the pads’ scrollbar to reach both rows without shrinking them to unusable sizes. Dragging a pad remains a performance gesture.
Channel strips
Every deck owns a channel in the mixer columns between the decks:
| Control | What it does |
|---|---|
| 3-band EQ | Low, mid and high, centre = flat |
| Filter | One-knob DJ filter, centre = bypass |
| Fader | Channel volume |
| Cue | Sends the deck to the headphone bus |
Knob ranges, the filter’s cutoffs, fader travel, the column layout, and what the meters show: Channels.
The whole strip can be taken off screen: Settings → Layout → Mixer strip. The decks stay and widen into the freed space; deck transport, pads, and the FX bar keep working.
With a Middle horizontal or Middle vertical waveform, the lanes already hold the center column. This switch then only changes the layout around them, and returning to Top or Bottom brings the strip back.
In four-deck mode, the controls run left to right as EQ/filter A+B → gain/volumes A+B → meters → gain/volumes C+D → EQ/filter C+D. Each gain knob sits directly above its volume fader.
Crossfader
Click A or B beside the crossfader to open that side’s deck checklist. Check a deck to assign it to that side; assigning it to the other side moves it rather than routing it to both. Uncheck a deck to set it to Thru, so the crossfader no longer affects it. The checklist follows assignments made from hardware too.
In a four-deck layout, the default assignments are A/C to side A and B/D to side B.
Set history uses these assignments when deciding whether a playing deck is audible, including decks assigned to Thru.
The crossfader and its hairline can be taken off screen: Settings → Layout → Mixer strip → Crossfader. The decks keep their assignments, so hardware and set history still follow them.
Curve
The crossfader’s gain law comes from Settings → Mixer → Crossfader → Default curve:
- Constant power (default) keeps the sum of both sides even across the middle, so the overall level does not dip as you cross.
- Linear is the plain
1 - x/xfade. - Fast cut stays at full gain near each end and swaps over in a short distance, useful for cut-based mixing.
Two flags modify any curve. Invert swaps the A and B gains without mirroring the fader position. Disable the crossfader leaves both sides at full gain, so the fader does nothing except for decks assigned to Thru. A mapped controller can change the active curve, sweep a curve set, or flip either flag live; the app’s Default curve only decides what a freshly started engine begins with.
Master output
The master meter sits at the left of the FX bar under the library. Click it to open Levels, which holds the master output level, the master cue toggle, the headphone level, and the cue/master blend for the headphones. See Cueing for how the headphone bus is built and what each control does.
Beat FX
The strip under the library is the shared effect unit: pick an effect, set the beat division, set the level, arm it, and choose which decks feed it. It has its own page: Beat FX.