Skip to content

Key Shift

Transpose the loaded track in semitones from the pads, latch an offset, and reset it from the utility page.

Select the Shift tab and the pads change the pitch of everything playing on that deck. It is a way to bend a track into the key of what is next, or to sing along without transposing the track itself.

Before you start

  • A track is loaded on the deck. With no track the pads are disabled: Overview.

Set an offset

  1. Select the Shift tab.
  2. Tap a pad to set the pitch offset to that value.

The offset is latched: it stays until you change or reset it.

The offset is expressed in semitones above or below the track’s own key, and covers ±16 semitones in total. It is a performance setting: the track’s saved key is never altered, and nothing is written back to your library.

This is separate from the tempo fader: the pitch moves without the tempo changing.

Pages

Key Shift has five pages. Pages 1–4 hold the same semitone values as Keyboard mode; page 5 is a UTIL page of shortcut pads:

Page Label Pads 1–8
1 +8…+12 +8, +9, +10, +11, +12, empty, empty, empty
2 (default) 0…+7 0, +1, +2, +3, +4, +5, +6, +7
3 -1…-8 -8, -7, -6, -5, -4, -3, -2, -1
4 -9…-12 empty, empty, empty, empty, -12, -11, -10, -9
5 UTIL see below

The settings button lists every page. The five pages wrap from 5 back to 1.

Page 5: utility pads

Pad Action
1 RESET: return the offset to zero
2 DOWN: lower the current offset by one semitone
3 -5 semitones
4 -12 semitones
5 SYNC: no action yet
6 UP: raise the current offset by one semitone
7 +7 semitones
8 +12 semitones

Blank pads on a page do nothing.

Check the result

The pad matching the current offset is highlighted. An offset with no absolute pad on the current page, such as ±13 to ±16, highlights nothing.

If the offset is wrong

  • Start over: page 5, pad 1, RESET.
  • One semitone off: page 5, pad 2 DOWN or pad 6 UP.

Shortcut

Hold Shift while pressing pad 7 / pad 8 to move to the next / previous page.