Skip to content

Stems

Mute or isolate the drums, bass, other, and vocals layers of a loaded track from the pads.

Select the Stems tab and the pads control the separated layers of the loaded track: Drums, Bass, Other, and Vocals.

Before you start

  • A track is loaded on the deck. With no track the pads are disabled: Overview.
  • The track has stems: an NI Stem file already loaded, stems generated for it, or Settings → Mixer → Realtime Stems enabled so Mixar separates it live. Realtime pads switch on once the first window is covered.

The pads

The top row mutes and unmutes, the bottom row isolates:

Pads 1–4 Pads 5–8
mute drums solo drums
mute bass solo bass
mute other solo other
mute vocals solo vocals

Mute

  1. Select the Stems tab.
  2. Press a pad in the top row to silence that layer.
  3. Press the same pad again to bring the layer back.

Isolate

  1. Press a pad in the bottom row to hear only that layer, with the other three silenced.
  2. Press the same pad again to clear the isolation and return to the mix of muted and unmuted layers.

Check the result

The pad lights while the layer is muted.

If the pads are disabled

If the loaded track has no stems yet, the pads stay disabled and do nothing. The track still plays normally.

While Mixar is separating a track, the pads show STEMS GENERATING….

Stem EQ on the mixer knobs

Press ST in the deck header to route that deck’s HI, MID, and LOW knobs to the stems instead of the channel EQ; the labels change:

Knob label Controls
VOC Vocals
B/O Bass and Other together
DRM Drums

Center is the normal stem mix. Turning a knob left fades that group out; turning it right isolates that group by fading the other two out. Mute and isolate pads still apply on top of the knob positions.

The toggle is per deck: it works with any pad mode selected, and pressing ST again returns the knobs to the channel EQ. ST is only available while the deck actually plays stems, so a track without stems still plays normally and the knobs stay on the channel EQ.

Live separation runs at about real time on a CPU. When it falls behind, the deck keeps playing the normal mix: the knobs temporarily return to the channel EQ, and ST goes unlit until stems catch up — the toggle itself stays on, so the routing resumes on its own. Cached stems (generated ahead of time and stored with the track) have no such limit.

The same command is available to controller mappings, see toggle_stem_eq.

More about stems

Overview, Native NI Stem files, Generate stems, and Storage.